﻿Steps to perform MTCAPW firmware upgrade:
-----------------------------------------
- Web into the MTCAPW device and login
- Click on System Related -> System Tools -> Firmware Upgrade
- Click on Choose File button and select the firmware BIN file
- Click on the Upgrade button
 
- DO NOT INTERRUPT DURING THE FIRMWARE UPGRADE PROCESS.   IT WILL TAKE AT LEAST 5 MINUTES TO COMPLETE

 -   After firmware upgrade is successful, Web into the MT again and make sure it displays the correct firmware version number you just upgraded.
 -   Press and hold the reset button for minimum 15 seconds to reset the MTCAPW back to factory default settings in case there are any issues.

----------------------------
August, 2022 (Version v4.06)
----------------------------
Firmware file name, version and MD5 checksum: 
	20220704_MultiTech_MTCAPW-L12G2-v4.06.bin (Version v4.06)
	MD5 checksum = 3fc671e228527bce03ced695d1dd4f7c

- Fixed - CVE-2022-0778 security issue relating to openssl module
- Fixed - Extended network registration check / wait time
- Fixed - removed list and dial number options in UI that is no longer used
- Fixed - Cellular Service Type of Service Information display "LTE(2CA)" when cellular WAN connected with 2xCA.

- Added - Power LED will blink during the radio DFOTA firmware update process via DeviceHQ
- Added - include iperf3 tool
- Added - support new DeviceHQ www2 with new devices 
- Added - set IP PDP context to IP instead of default IPV4V6 so it is compatible with FreedomFi CBRS network